distributor-manufacture,factory,supplier from China

Hydroxypropyl methylcellulose (HPMC) and hydroxyethyl methylcellulose (HEMC) are widely used building materials, when applied to gypsum-based plastering, it has the following characteristics:Water Retention: Retains in the mortar, allowing the gypsum to fully set.

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.

Main applicationHPMC is one of the main dispersants in PVC industry. During suspension polymerization of vinyl chloride, it can reduce the interfacial tension between vinyl chloride monomer (VCM) and water, and help VCM to be evenly and stably dispersed in the aqueous medium; Prevent the coalescence of VCM droplets at the initial stage of polymerization; Prevent coalescence between polymer particles in the later stage of the polymerization process. In suspension polymerization system, it plays a dual role of dispersion and stability protection.

HPS Main application1.food industry, used as thickener, suspending agent and adhesive.2.in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.3.in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving.

Hydroxyethyl methyl cellulose ether soluble in water and some organic solvents.  Can be dissolved in cold water, its highest concentration is determined only by viscosity, solubility changes with viscosity, the lower the viscosity, the greater the solubility.  Because the aqueous solution has surface active function, can be used as colloid protectant, emulsifier and dispersant, the highly concentrated aqueous solution of the product has special viscoelastic properties compared with the aqueous solution of other polymers, and its addition has the ability to improve the shape

Hpmc empty capsule do now not include animal-derived components; they were evolved approximately 30 years in the past in the course of the look for an similarly-green alternative to tough gelatin pills.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products &n

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

MELLUTEL™ PCH200MS is a white or off-white powder, odorless, tasteless and non-toxic. Soluble in a mixture of cold water and organic solvents to form a transparent viscous solution.

Our cellulose ethers use a unique technology that allows control of particle morphology. They achieve the ideal balance of water retention, even at high temperatures, while taking efficiency and workability to a new level.

• Improve sag resistance & anti-slap• Optimize rheological behaviour, particularly the flow characteristics and workability• Enhance adhesion strength• Increase mortar yield• Cost-effective. Obtain desired thickening effect with very low dosage. MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

ETONse YT series starch ether is a kind of non-ionic starch ether products suitable for building materials system such as putty, tile adhesive and mortar after careful analysis of market demand by the R&D team of ETON.This series of products through the use of special reaction process and production process, so that the product has a series of performance advantages, in putty, tile adhesive and mortar applications have a unique advantage.Excellent workability: It has excellent workability in the application of internal and external wall putty and gypsum-based plastering.Good slip resistanc

Appearance is White to slightly off-white fibrous or granular powder.

Appearance is White to slightly off-white fibrous or granular powder.

Appearance is White to slightly off-white fibrous or granular powder.

Cellulose ethers are often used as water-retaining agents in (desulfurized) gypsum mortar. Years of research have shown that,water-retaining agent has a very important influence on the gypsum quality and anti-plastering layer performance of plastering gypsum.

HPMC is mainly used in the field of honeycomb ceramics. Honeycomb ceramics were first used to purify the exhaust gas of small cars. Now they have been widely used in chemical industry, electric power metallurgy, petroleum, electronics, electrical appliances, machinery and other industries.

ETON HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material.It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Hydroxypropyl Methyl Cellulose (Mellutel YT-50) is beside Polyvinylalcohol (PVA) one of the most commonly used suspending agents. Mellutel YT-50 controls the particle size and their distribution, influences the porosity and defines the bulk weight of PVC. The porosity of the polymer particles is strongly linked to the property to adsorb additives like plasticizers or stabilizers. Thereby, the properties of the polymer during processing and of the final product can be controlled. Ultra low viscous Mellutel YT-50 is the most suitable product for PVC manufacturing processes.

MELLUTEL-SL400Application in the Self-levelingSelf-leveling mortar is a special dry mixed mortar product with self-leveling and self-compaction function; it is widely used in factories, hospitals, shopping malls, offices and well. Home furnishing and other places. MELLUTEL leveling  cellulose e ther products, after special process control, widely used in various cement and gypsum based leveling Product system.1. Prevent settlement, stratification, segregation, etc., and ensure the flow degree and operating time of self-leveling mortar2.

MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance. It can be used together with cellulose ether to improve the thickening features of cellulose- ethers used for products in the construction industry like plaster, filler and tile-adhesive etc.Application Data Presentation